Today I’m bringing you a quick overview and installation of the black dual halo LED projector headlights fitting the front end of all 2004 to 2008 f-150. I’ll be going over the styling and appearance you can expect from these dual halo headlights as well as all the materials and Continue Reading
The camera and anything else that I may want them out on my dash while driving at the same time. This is the factor off-road JK email and the reason why I went with this is because of the versatility of all the different spots that I can no one Continue Reading
First start by removing the plastic cover, you can use a flathead screwdriver, but the fastener removal tool makes this process much easier. Once you’ve removed the plastic cover, you’ll remove the grille. Remove the four bolt with a socket. After removed all four bolts, pull the grille with a little bit of force. Next is the headlights, there are two bolts on the front. Remove the Continue Reading
I want to talk about the Dodge Ram 1500 headlight adjustments not only just talk about them, but show you how to adjust them and a really good way to see how the rays of the headlights go up and down by that adjustment. inside this head unit there is a little bulb and a bulb snaps into a little holder. If Continue Reading
Do you want to get a good performing LED headlight bulb on your car that provides a good beam pattern and a lot of brightness? We recently found the best one and I’m going to show you how to install it. And more importantly, what it looks like against the Continue Reading
Today I’m going to show you guys how to get the headlights that you wanted in your truck that didn’t come with them. Now most of us use original reflector headlights in the truck and I wish it could come with the bi xenon projector headlights, but I didn’t want Continue Reading
I like the look of the Recon Air Dam lights, yet $200 for an established appeared pretty absurd to me so I did some research study and also found that they seem re-packaging Maxxima 3/4 LED lights. I had the ability to get a set of 15 of the clear Continue Reading
So I have seen a couple of grills with the Raptor style LEDs on eBay but it did not like the overall appearance of them. So I made my very own. It was pretty easy as well as could not be for everyone, but I like it and makes my Continue Reading
It is necessary to learn how to flush and fill the coolant in your truck. Keep your radiator, heater core, and engine clean. Flushing your coolant is good for the cooling system to prevent rust and to prevent your car from overheating. I would recommend doing a flush of the Continue Reading
Homemade shift knob I wanted to change the stock shifter because I didn’t like the looks or feel of it. We can find many replacement shifters on Google or Amazon, just choose one as you like. My Parts: 7/8 solid aluminum rod 7/8 lock on grips M3x0.5x5mm M5x0.8x8mm Tools Continue Reading
